Close window [X]   

Coller Industries, Incorporated

801-931-5000   |   www.nametag.com

2211 South 300 West , Salt Lake City, UT 84115   |   Print Date: October 21 2020 04:29:16 AM

Join our exclusive newsletter and get 10% off your next order.
Driving Influence with Quality Identification
We are happy to be open and serving you for all your name tag needs. Our business hours are 7 a.m. to 5 p.m. Monday through Friday.


2x3 custom plastic name tags

Create custom name tags in any size up to 12 sq. inches. More than a selection of preset sizes, we offer the opportunity to customize your product by deciding on the size, shape, text location, fastener selection. You may even choose to upgrade with clear domes to highlight and protect your new tags.

SET-UP FEE: $10.00


Product Specifications

Quantity Pricing

Custom Size Name Tags (Plastic, Text Only)

If you have ordered this product before, use the reorder page to allow for faster processing, consistency with previous orders and no set-up fees.

Name tags must be between 2 square inches and 12 square inches. Please enter the height and width using decimals or fraction formats with a hyphen(-) or space( ) between the whole number and the fraction (1-1/2 or 1 1/2).

We could not parse one of your size entries please try again

Please email your list to nametag@nametag.com.

Price Calculator

As you configure your item, the price will be shown here.

Product Specifications

Your text will be engraved onto the surface of the plastic, removing the top layer and creating two color tags. You may fully customize the size of these tags up to 12 square inches.

SIZE: Name tags must be between 2 square inches and 12 square inches. You may place an order for oversized tags as Name Plates.

DIMENSIONAL REQUIREMENTS: Minimum height or width cannot be less than 0.75 inches. Maximum height or width cannot be more than 12 inches.

MATERIAL: Made of 0.06 inch thick two-ply plastic with surface and core colors. When engraved, the text will be the core color shown on the color chart.

STYLE: Plastic tags allow for round or square corners. The edges may be beveled, allowing a small bit of the material core color to show around the edges.

FASTENER: Some fasteners may not fit on a custom size tag. If there is a problem with your selection, we will contact you.

SURFACE: A dome surface protects the name tag against everyday wear and tear.

TEXT: Up to four lines of horizontal engraved text.

SHIPPING: The opportunity to select shipping methods is available during the checkout process.

PROOF: You will receive a proof of your custom design through the email provided with your order. If any changes are required, respond via email or phone, and we will work with you to get it right.

PRODUCTION: One business day for up to 99 tags. Orders including a dome surface may required addition time.


Quantity Pricing Tables

PRICE INCLUDES: Plastic name tag that is under 4 square inches and a standard fastener (pin, bulldog clip, bulldog clip with pin, double clutch).

You may use the price calculator directly below the order form to see the price for the tag as you have it configured. Pricing for custom sized tags is dependent on size, number of lines, selected fastener and any upgrade options.

Item1+5+25+50+100+250+500+1000+2500+5000+
Tag (less than 4 sq. inches) with 1 line of text$6.22$5.91$5.29$4.36$3.42$3.12$2.80$2.49$2.31Call
Tag (less than 4 sq. inches) with 2 lines of text$7.47$7.10$6.35$5.24$4.11$3.75$3.36$2.99$2.77Call
Tag (less than 4 sq. inches) with 3 lines of text$8.72$8.29$7.41$6.12$4.80$4.38$3.92$3.49$3.23Call
Tag (less than 4 sq. inches) with 4 lines of text$9.97$9.48$8.47$7.00$5.49$5.01$4.48$3.99$3.69Call
*Each Additional Square inch$0.70$0.67$0.60$0.49$0.39$0.35$0.32$0.28$0.25Call
†Domed Surface$3.50$3.50$3.50$3.50$3.50$3.50$3.50$3.50$3.50Call
†Magnetic Fastener$1.10$1.10$1.10$1.10$1.10$1.10$0.96$0.91$0.87Call
†Punched slot (Required for Clip on a Strap)$0.50$0.50$0.50$0.50$0.50$0.50$0.50$0.50$0.50Call
†Clear Pocket Clip$1.50$1.50$1.50$1.25$1.25$1.15$1.15$1.00$1.00Call

*The preferred method of calculation for the cost of your custom sized name tag is our pricing calculator located at the bottom of the custom selections. However, if you would like to know how we calculate this price, you can follow these steps

To find the total tag cost, follow these steps:

Additional square inches = ((height x width)-3) round down to the nearest integer) x price for each additional inch.
Total Price = Additional square inches + tag price from the table.

  1. You will need to figure out the total square inches for the custom size. Do this by multiplying the height by the width.
  2. Once you have the total square inches for your custom size, subtract three. This number comes from the three square inches included in all tags. Round down to the nearest integer.
  3. Now that you know how many additional square inches your custom size requires, you need to calculate the extra cost per name tag. Do this by multiplying the additional square inches by the price found in the pricing table. NOTE: This cost is variable due to quantity discounts.
  4. After figuring out how much these additional square inches will cost, add that cost to the original name tag price also located in the pricing table. This number will give you the total cost per name tag. If you need to know what your total order cost will be, take the cost per name tag and multiply it by the number of tags you are ordering.

(e.g., For five 2 x 4 inch name tags with one line of text : (((2 x 4) – 3) x $0.67) + $5.91) = $9.26 each, $46.30 total product price.)

†Add the cost of these optional upgrades to the cost of your tags for the total product cost.


Quality Products and Service
Read or Write a Review