2211 South 300 West , Salt Lake City, UT 84115 | Print Date: June 28 2017 04:36:29 PM
Reusable Name Plates are a high quality solution that also helps keep the budget under control, especially for offices with more frequent turnaround. All components may also be ordered separately: Metal Back Plates, Wall Mounts or Desk Holders, Lexan Lens (slider), and Inserts.
All four components are required to assemble a complete Reusable Name Plate.
MINIMUM ORDER: 5 name plates.
Add a logo to the back plate.Set-up Fee: $35.00
A designer will review your artwork and advise you if adjustments are required for the process you have selected. Additional charges may apply if changes to your artwork are necessary.
Vector art is the required format for all engraved products. UV Color Logo products, Mighty Badges™, and Reusable Name Plates require vector art for printing on all material colors other than white. A high quality bitmap image may be acceptable for these same products if using white material, or for all Digitally Printed Full Color products.
Vector Files: Adobe® Illustrator (.ai), CorelDRAW (.cdr), PostScript (.eps)
Bitmap (Raster) Files: Image Files (.jpg , .gif, .png, .tif, .bmp), Photo-Paint (.ppt), Photoshop (.psd)
Image files that are embedded in a .doc or .pdf file may also be accepted if the embedded file is a vector file or high quality bitmap file.
It is not possible to convert a low quality image into a vector file simply by saving it in a vector format. When this is attempted, the low quality image is simply embedded in the new file and no conversion takes place. It is not possible to change a low quality image to a higher quality one simply by saving it with higher DPI settings. The image will have more dots per inch, but the quality will remain the same or even degrade further.
For your convenience, we offer an artwork clean-up/conversion process for $30 per image. You will be charged for this service even if an order is not completed. You may request the new file be sent to you upon payment of your order. Turn around time is 24 hours and expedited production is not available.
We welcome the use of PMS colors to communicate the colors you would like but do not guarantee a color match.
Lexan Sliders help keep Reusable Name Plates and their printed inserts in place. These are shipped automatically (no charge) when Wall Mounts or Holders are ordered on this page.
All orders of stock reusable name plates placed Monday - Friday by 11:00 AM Mountain Time will be shipped same day (excluding Holidays).
Production will begin when all information required for your order has been received. Failure to provide lists, artwork or proof approval may delay your order. Production times will vary depending upon product ordered, quantity ordered, and product requirements. Orders received after 11 a.m. (MT) will be processed the next day. Requests for a need by date may be indicated during the check out process. Shipping methods, as available, may be selected once the product has been added to the shopping cart. If necessary, once your order has been placed, a customer service representative will contact you to finalize any production/shipping details to meet your requested date. Additional charges will apply for any expedited needs.
Price: $4.50 per sheet
SIZE: 8.5" x 11" Transparency
NUMBER OF INSERTS PER PAGE: 3
*Compatibility with your printer is not guaranteed. If Plus Film Pro (laser) inserts are ordered and your machine is incompatible, it is possible to exchange any unused Plus Film Pro (laser) sheets for Classic (ink-jet) sheets. Call for exchange/return information.
Clear Peel Off Inserts: $5.50 per sheet.
These clear, plastic peel off inserts are designed for those who only need one at a time. Simply print the names you need and remove them from the sheet as you need them. They fit most reusable name plate sizes and are available for both laser and inkjet printers.
Paper Peel Off Inserts: $3.50 per sheet.
Perfect for designs, these opaque, paper peel off inserts will give your name plate a unique look. They cover the back plate entirely with your full color insert. Use either a laser or inkjet printer and remove them one at a time from the sheet or use the whole sheet at once. These are not compatible with logos.
Classic Clear Inserts: $5.50 per sheet.
Meant for a larger run of names, these clear, plastic inserts are torn out of the sheet after printing. Use each sheet on either a laser or inkjet printer. You will want to make sure you print the whole sheet as it is not recommended to run these through your printer after you remove any of the inserts.
PC Systems Only
A complete software package must be purchased to install the program on your system. Additional licenses may be purchased separately.Software with 1 License: $55.00
Have a question? Free technical support: 866-540-5417 ext. 5
Name Tag, Inc. is not responsible for lost software or licenses.
Every computer installed with the NamePrint Graphics software will need to have the software installed with a unique license. These additional licenses may be purchased for activating the NamePrint Graphics software installed and activated on any additional computers.Additional Licenses: $15.00 each
Please visit the reorder page if you have ordered with us before or have any of the following items: a customer number, an existing layout, and/or a previous order number. Placing a reorder will allow for quicker processing, consistency between orders, and a reduction or elimination of the set-up fees required for a new order.
Each reusable name plate requires four parts: the metal back plate, the printable insert, the clear lens and a wall mount or desk holder. The metal back plate has the option of leaving it blank or printing a logo on it. The inserts are fully printable on a laser or inkjet printer and can be replaced as needed for new names. The clear, plastic lens slides into place over the top of everything to hold the name plate together.
SIZE: 2x8 inches or 2x10 inches
MINIMUM ORDER: 5 Name Plates
PRICE INCLUDES: Metal Back Plate, Holder, Lexan Lens. Inserts are priced by the sheet (3 inserts per sheet).
All four required components of Reusable Name Plates can be ordered on this page. For individual components, inserts and NamePrint Graphics software, please visit the Reusable Name Plate Landing Page. Shipping costs will be displayed in the shopping cart.
SET-UP FEE: $35.00 if a logo is selected. (No set-up fee is charged on re-orders of the same layout or for reusable nameplates without a logo.)
|2x8 Plate w/Wall Mount||$10.10||$9.34||$8.65||$7.78||$7.00||Call|
|2x8 Plate w/Desk Holder||$13.24||$12.25||$11.33||$10.20||$9.17||Call|
|2x10 Plate w/Wall Mount||$11.45||$10.58||$9.79||$8.81||$7.92||Call|
|2x10 Plate w/Desk Holder||$15.93||$14.73||$13.63||$12.27||$11.03||Call|
|*Add a logo||$2.85||$2.63||$2.43||$2.19||$1.97||Call|
|Inserts (per sheet)||$5.50||$5.50||$5.50||$5.50||$5.50||Call|
*Add the cost of the optional logo upgrade to the cost of your name plates for the total product cost.