Metal name tags (.02 inches thick) are laser engraved with your logo. Space is left for names to be added with labels or a permanent marker. PRICES START AT: 5 name tags for $4.32 each, 100 name tags for $2.30 each. Discounts are available for other quantities. MINIMUM ORDER: 5 name tags

Custom sized metal name tags are also available
Minimum size: 0.75 x 2.75 inches | Maximum size: 8 square inches.

MINIMUM MEASUREMENTS: width - 2.00 in. | height - 0.75 in.
MAXIMUM MEASUREMENTS: width - 4.00 in. | height - 3.00 in.
MINIMUM SIZE: 2 square inches
MAXIMUM SIZE: 8 square inches*
To figure square inches multiply the width by the height.

* Badges over 8 square inches may be ordered as NAME PLATES.

The surface color of the name tag is shown in the larger rectangle.
The smaller rectangle shows the color of the text and logo.
No color guarantee is made by these images,
if an exact match is required please request a material sample.

All metal name tags without a frame will be produced with round corners.
Framed name tags will have corners finished to fit the frame properly.

PICTURE FRAMES (Gold & Silver) Add $4.50 per tag MEDIUM: 1 x 3 inches LARGE: 1.5 x 3 inches

CLASSY FRAMES (Gold, Silver & Black) Add $3.00 per tag SMALL: 0.75 x 2.75 inches MED. GOLD & SILVER: 1.13 x 3 inches MED. BLACK: 1 x 3 inches LARGE: 1.5 x 3 inches

*Pin/clip Combo and Swivel Bulldog Clips are not available on tags smaller than 1 x 3 inches.

MAGNETS (up-graded fastener)	PINS	*PIN/CLIP COMBO (up-graded fastener)
*SWIVEL BULLDOG CLIP	DOUBLE CLUTCH	NO FASTENER

Vector art is the preferred format for all products, however a high quality bit-mapped image may be acceptable for full color products.

It is not possible to convert a low quality image into a vector file simply by saving it in a vector format. When this is attempted the low quality image is simply embedded in the new file--no conversion takes place. It is not possible to change a low quality image to a higher quality image simply by saving it with higher dpi settings. The image will have more dots per inch—but the quality will remain the same or even degrade further.

For your convenience we offer Artwork clean-up/conversion for the low price of $30 per image. Clean-up/conversion will not be done until you have approved the clean-up/conversion, and you will be charged for this service, even if an order is not completed (you can request the new file be sent to you upon payment of your order). There is a 24 hour turnaround required for this service with no expediting available.

Black and white, one color vector art is required for laser engraved products. If you do not have a black and white, one color vector file, one may be created for you at an additional charge of $30.00.

Proof time + Production time + Shipping = Total time to delivery

Proof - After acceptable artwork and a properly formatted list of names have both been provided, a digital proof will be created and emailed to you within 4 business hours. If changes to the paper proof are requested, a new proof will be provided within 24 hours. Production WILL NOT begin until an approved, signed proof is received by Name Tag, Inc.

Production - Once an approved proof has been received, production begins. If the production time and/or the shipping method need to be adjusted to meet your 'need by date' you will be contacted before production begins.

Completed orders (with a signed proof and a properly formatted list) must be received by 5:30pm Mountain Time, or they will be processed the next day.

EXPEDITED FEES: $50.00

QUANTITY	STANDARD	EXPEDITED*
1-99	Next day	Same Day (11am MT deadline)
100+	Two days	Next day
250+	Three days	Two days
500+	Four+ days	-- N/A --

*Expedited production may not always be available

Shipping - Shipping methods (Ground, 2 Day Air, Next Day Air, etc.) will become available once the product has been added to the shopping cart.

ART SUBMISSION

All artwork will be reviewed by a designer and adjustments to your order will be made, if necessary. These adjustments will be shown on your proof prior to production. If any adjustment to your artwork must be made by Name Tag, Inc. additional charges may apply.

We welcome the use of PMS colors to communicate the colors you would like, but do not guarantee a color match.

LIST SUBMISSION

Enter text EXACTLY as you want it to appear on the name tags (including upper/lower case letters).

Long lines of text may be condensed to fit the available space.

Lists must contain all text to be printed - for duplicate tags enter the text twice

Proof lists carefully: your list will be used to print your tags, Name Tag, Inc. is not responsible for lists that are formatted incorrectly or contain errors.

Name Tag, Inc. will not edit your list. Lists not prepared to our specification will be returned for correction, which may cause a delay in production.

Company policy requires that all lists be in writing. Names (even just one name) will not be accepted over the phone. Lists can be presented in the form of an attachment in an email, on a floppy disk, or on a CD. Faxed lists are acceptable, but a data entry fee will be charged to type the list into our system.

SAMPLE LISTS
1 LINE LIST Margaret Margaret Mark G. Jeff	2 LINE LIST Allison Meyers Director Margaret Jones Secretary John Adams Teacher	3 LINE LIST World Wide Manufacturing Bryce Vaughn Marketing Development World Wide Manufacturing Barbara Jackson Marketing Representative

ART SUBMISSION

All artwork will be reviewed by a designer and adjustments to your order will be made, if necessary. These adjustments will be shown on your proof prior to production. If any adjustment to your artwork must be made by Name Tag, Inc. additional charges may apply.

We welcome the use of PMS colors to communicate the colors you would like, but do not guarantee a color match.