Badge holders are available in a variety of sizes, fasteners, materials and styles. All sizes refer to the size of the inserts. Exterior dimensions vary by product, call if these dimensions are important for your order.
PRICES: See Chart Below
BADGES HOLDER SIZES/MATERIALS
2.25 x 3.5" HORIZONTAL
3.0 x 4.0" HORIZONTAL
VINYL:10 mil rigid vinyl front/8 mil vinyl back LIGHT WEIGHT VINYL:
8 mil rigid vinyl front/8 mil vinyl back ACETATE:
7.5 mil vinyl front and back
VERTICAL AVAILABLE SIZES/STYLES
SECURE:
4.0 x 2.75 inches
VERTICAL: 4.0 x 2.25 inches
SMALL: 3.0 x 2.25 inches
HEAVY DUTY: 4.0 x 2.75 inches
EXTRA LARGE: 6.25 x 4.25 inches MATERIAL
Vinyl--weights vary by product
2.25 x 3.5" VINYL BADGE HOLDERS
INSERTS: 2.25 x 3.5 inches (inserts slide in from the top).
MATERIAL: 10 mil rigid vinyl front / 8 mil vinyl back
Inserts must be purchased separately
(BH471M01) MAGNETIC FASTENER
Magnets create a strong bond, even through thick clothing, preventing holes and clothing damage.
(BH471H01) PUNCHED HOLES
Holes can accommodate an
elastic
cord, a chain, or a
J hook lanyard.
(Purchased separately)
(BH471C01) CLIP FASTENER
The clip provides a strong grip, easily attaching to a pocket or the seam of a shirt.
(BH471B01) PIN/CLIP FASTENER
Provides the option of using either the clip or the pin to attach the badge holder.
2.25 x 3.5" LIGHT WEIGHT VINYL BADGE HOLDERS
INSERTS: 2.25 x 3.5 inches (inserts slide in from the top).
MATERIAL: 8 mil rigid vinyl front / 8 mil vinyl back
Inserts must be purchased separately
(BH471S01) PUNCHED SLOT/HOLES
Slot will accommodate a bulldog clip
or a short plastic strap.
(Purchased separately)
2.25 x 3.5" and 3 x 4" ACETATE BADGE HOLDERS
INSERTS: 2.25 x 3.5 inches and 3.0 x 4.0 inches (inserts may be slid in from the side or the back may be opened).
MATERIAL: 7.5 mil acetate front and back.
Inserts must be purchased separately
(BH410D01 - 2.25 x 3.5 inches) (BH410G01 - 3.0 x 4.0 inches) PIN FASTENER
3 x 4" VINYL BADGE HOLDERS
INSERTS: 3.0 x 4.0 inches (inserts slide in from the top).
MATERIAL: 10 mil rigid vinyl front / 8 mil vinyl back
Inserts must be purchased separately
(BH553M03) MAGNETIC FASTENER
Magnets create a strong bond, even through thick clothing, preventing holes and clothing damage.
(BH553H03) PUNCHED HOLES
Holes can accommodate an
elastic
cord, a chain, or a
J hook lanyard.
(Purchased separately)
(BH575SH04) PUNCHED SLOT/HOLES
Slot will accommodate a bulldog clip
or a short plastic strap.
(Purchased separately)
(BH553B01) PIN/CLIP FASTENER
Provides the option of using either the clip or the pin to attach the badge holder.
3 x 4" LT WEIGHT VINYL BADGE HOLDERS
INSERTS: 2.25 x 3.5 inches (inserts slide in from the top).
MATERIAL: 8 mil rigid vinyl front / 8 mil vinyl back
Inserts must be purchased separately
(BH553P01) PIN
(BH553C01) CLIP FASTENER
Clip can be attached to a pocket, the seam of a shirt or other locations.
VERTICAL BADGE HOLDERS (4 x 3 inches) - BH386V01
(BH386V01) PUNCHED SLOT
INSERT:4.0 x 3.0 inches (inserts slide in from the top).
MATERIAL: 8 mil vinyl
The slot will accommodate a bulldog clip or a short plastic strap. (Purchased separately).
SECURE VERTICAL BADGE HOLDERS (4 X 2.5 inches) - BH370V01
(BH370V01) PUNCHED SLOT
INSERT:4 x 2.5 inches (inserts slide in from the top).
MATERIAL: 8 mil vinyl
The slot is punched in both the front and back, which is 0.5 inches higher than the insert -- a clip will close the top and the insert will not fall out. The slot will accommodate a bulldog clip or a short plastic strap. (Purchased separately).
SMALL VERTICAL BADGE HOLDERS (3.5 x 2.25 inches) - BH322V01
(BH322V01) CLIP FASTENER
INSERT:3.5 x 2.25 inches (inserts slide in from the top).
MATERIAL: 8 mil vinyl
Clip can be attached to a pocket, the seam of a shirt or other locations.
HEAVY DUTY VERTICAL BADGE HOLDERS (4 x 2.75") - BH371V01
(BH371V01) PUNCHED SLOT/HOLES
INSERT:4.0 x 2.75 inches (inserts slide in from the top).
MATERIAL: 8 mil vinyl font, extra strong 24 mil vinyl back.
The slot will accommodate a bulldog clip or a short plastic strap. (Purchased separately).
EX LARGE VERTICAL BADGE HOLDERS (6.25 x 4.25") - BH628V01
(BH628V01) PUNCHED SLOT/HOLES
INSERT:6.25 x 4.25 inches (inserts slide in from the top).
MATERIAL: 12 mil vinyl font, 12 mil vinyl back.
The slot will accommodate a bulldog clip or a short plastic strap. (Purchased separately).
INSERTS
INSERT SIZE: 2.25" x 3.5" (8 per page), and 3.0" x 4.0" (6 per page)
MATERIAL: Perforated 8.5 x 11 inch, 67 pound index (Card Stock)
COLORS: White, Pink, Salmon, Buff, Light Green, Light Blue, Yellow, Gray (Only white inserts may be purchased on this page. For all other colors, and for custom printed inserts please visit the Badge Holder Insert page.)
